Home › Engine / Hybrid System › 1NZ-FXE FUEL › FUEL PUMP › 2014.12–2017.06
RM2170E _51 Engine / Hybrid System _057006 1NZ-FXE FUEL _0277955 FUEL PUMP A

1NZ-FXE FUEL  FUEL PUMP  DISASSEMBLY  


PROCEDURE

Hide 23220A 2.REMOVE FUEL PUMP WITH FILTER ASSEMBLY

a.
A105592

Disconnect the connector of the fuel pump harness.


b.
A109341

Disconnect the suction filter hose.


c.
A119168E01
0.181,1.216 0.382,1.414 0.201,0.199 10 *1 2.598,1.73 2.799,1.929 0.201,0.199 10 *2 0.839,1.302 0.391,1.302 false 2.121,1.475 2.461,1.823 2.461,1.823 2.576,1.823 false

Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws, and remove the fuel filter and fuel pump with filter assembly from the No. 1 fuel sub-tank.

Text in Illustration
*1 No. 1 Fuel Sub-tank
*2 Fuel Tube

NOTICE:

Do not do anything which may separate the fuel tube from either the fuel suction plate or fuel filter, such as applying excessive force to the tube (See page Engine / Hybrid System>1NZ-FXE FUEL>FUEL SYSTEM>PRECAUTION).



d.
A119157

Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the No. 1 fuel suction support.


e.
A268451E03
1.479,0.417 1.229,0.167 1.229,0.167 1.104,0.167 false 0.615,1.99 0.458,2.135 0.458,2.135 0.333,2.135 false 0.896,0.073 1.063,0.24 0.167,0.167 10 false *1 0.146,2.052 0.313,2.219 0.167,0.167 10 false *2

Using a screwdriver with its tip wrapped in protective tape, disengage the 5 claws, and remove the fuel pump with filter assembly from the fuel filter.

Text in Illustration
*1 Fuel Filter
*2 Suction Filter

NOTICE:
·

Do not damage the fuel filter.

·

Do not remove the suction filter.

·

Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.




f.
A171289

Disconnect the fuel pump harness connector.


g.
A192533E20
0.927,4.021 1,4.156 1,4.156 1.24,4.156 false 2.219,0.667 2.417,0.469 2.417,0.469 2.583,0.469 false 2.229,0.865 2.625,0.865 false 2.635,0.375 2.833,0.583 0.198,0.208 10 false *1 2.656,0.771 2.844,1.125 0.188,0.354 10 false *2 1.938,2.229 2.115,2.458 0.177,0.229 10 false *a 1.854,1.646 2.031,1.802 0.177,0.156 10 false *a 1.292,4.094 1.479,4.281 0.188,0.188 10 false *1

Remove the O-ring and fuel pump spacer from the fuel pump with filter assembly.

Text in Illustration
*1 O-ring
*2 Fuel Pump Spacer
*a 5.0 mm (0.197 in.)

NOTICE:

Be careful not to damage the sealing surface.


HINT:

If the O-ring still remains in the fuel filter assembly, remove it using a wire tip (1 mm diameter) that is formed as shown in the illustration.