Home › Engine / Hybrid System › 1NZ-FXE EMISSION CONTROL › EGR VALVE
RM2170E _51 Engine / Hybrid System _057007 1NZ-FXE EMISSION CONTROL _0277959 EGR VALVE A

1NZ-FXE EMISSION CONTROL  EGR VALVE  REMOVAL  


PROCEDURE

Hide 25612 2.REMOVE NO. 2 EGR PIPE

a.
A268229

Disconnect the wire harness clamp.


b.

Disengage the clamp and disconnect the No. 2 water by-pass hose.


c.

Remove the 2 bolts and 2 nuts.


d.

Remove the No. 2 EGR pipe and 2 gaskets.


Hide 25620 3.REMOVE EGR VALVE ASSEMBLY

a.
A267673

Disconnect the 2 connectors and wire harness clamp.


b.
A267672

Remove the bolt and wire harness clamp bracket.


c.
A266465

Disengage the clamp and disconnect the No. 5 water by-pass hose.


d.

Remove the 2 bolts, nut and EGR valve bracket.


e.
A266466

Disconnect the No. 1 water by-pass hose.


f.
A267671

Using an E8 "TORX" socket wrench, remove the 2 stud bolts.


g.
A266463

Remove the 2 bolts, EGR valve assembly and gasket.