Home › Engine / Hybrid System › 1NZ-FXE EMISSION CONTROL › VACUUM SENSOR
RM2170E _51 Engine / Hybrid System _057007 1NZ-FXE EMISSION CONTROL _0277961 VACUUM SENSOR A

1NZ-FXE EMISSION CONTROL  VACUUM SENSOR  INSTALLATION  


PROCEDURE

Hide 89421 1.INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR

a.

Install the manifold absolute pressure sensor with the bolt.

Torque:
7.1 N*m (72 kgf*cm, 63 in.*lbf)


b.

Connect the connector.


Hide 2.INSTALL AIR CLEANER CASE SUB-ASSEMBLY

a.

Install the air cleaner case sub-assembly with the 2 bolts and grommet.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)


b.

Install the air cleaner filter element sub-assembly.