Home › Engine / Hybrid System › 1NZ-FXE EMISSION CONTROL › PCV VALVE
RM2170E _51 Engine / Hybrid System _057007 1NZ-FXE EMISSION CONTROL _0277963 PCV VALVE G

1NZ-FXE EMISSION CONTROL  PCV VALVE  INSPECTION  


PROCEDURE

Hide 12204 1.INSPECT VENTILATION VALVE SUB-ASSEMBLY

a.

Install a clean hose to the ventilation valve sub-assembly.


b.

Check ventilation valve sub-assembly operation.

i.
A196038E05
2.057,1.709 2.205,1.857 0.148,0.148 10 *1 2.815,0.189 2.972,0.344 0.157,0.155 10 *a 3.174,1.016 3.331,1.171 0.157,0.155 10 *b 2.237,1.785 2.381,1.785 2.381,1.785 2.793,1.436 false

Blow air into the cylinder block side, and check that air passes through easily.

Text in Illustration
*1 Clean Hose
*a Cylinder Head Cover Side
*b Air

CAUTION:

Do not suck air through the valve.

Petroleum substances inside the valve are hazardous to your health.


If the result is not as specified, replace the ventilation valve sub-assembly.


ii.
A196039E04
1.304,1.732 1.459,1.886 0.156,0.155 10 *1 0.475,1.019 0.631,1.174 0.156,0.155 10 *b 0.221,0.142 0.394,0.301 0.173,0.159 10 *a 1.278,1.826 1.122,1.826 1.122,1.826 0.573,1.277 false

Blow air into the intake manifold side, and check that air passes through with difficulty.

Text in Illustration
*1 Clean Hose
*a Intake Manifold Side
*b Air

CAUTION:

Do not suck air through the valve.

Petroleum substances inside the valve are hazardous to your health.


If the result is not as specified, replace the ventilation valve sub-assembly.



c.

Remove the clean hose from the ventilation valve sub-assembly.