Home › Engine / Hybrid System › 1NZ-FXE (COOLING) › COOLING FAN MOTOR
RM2170E _51 Engine / Hybrid System _057009 1NZ-FXE COOLING _0277976 COOLING FAN MOTOR A

1NZ-FXE COOLING  COOLING FAN MOTOR  INSTALLATION  


PROCEDURE

Hide 16363 1.INSTALL COOLING FAN MOTOR

a.

Install the cooling fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


b.

Connect the 2 clamps and connector.


Hide 16361 2.INSTALL FAN

a.

Install the fan with the nut.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)


Hide 16400 3.INSTALL RADIATOR ASSEMBLY