Home › Engine / Hybrid System › 1NZ-FXE (LUBRICATION) › OIL PUMP
RM2170E _51 Engine / Hybrid System _057010 1NZ-FXE LUBRICATION _0277980 OIL PUMP A

1NZ-FXE LUBRICATION  OIL PUMP  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL OIL PUMP RELIEF VALVE

a.

Apply engine oil to the oil pump relief valve.


b.
A089057

Install the oil pump relief valve and oil pump relief valve spring to the oil pump cover.


c.

Install the oil pump relief valve plug.

Torque:
25 N*m (255 kgf*cm, 18 ft.*lbf)


Hide 2.INSTALL OIL PUMP ROTOR SET

a.

Apply engine oil to the drive and driven rotors.


b.
B009333

Install the rotors to the oil pump body with the marks facing upward.


c.
A265761

Install the oil pump cover with the 2 bolts and 3 screws.

Torque:
Bolt : 8.8 N*m (90 kgf*cm, 78 in.*lbf)
Screw : 10 N*m (105 kgf*cm, 8 ft.*lbf)