Home › Engine / Hybrid System › 1NZ-FXE (LUBRICATION) › OIL PRESSURE SWITCH
RM2170E _51 Engine / Hybrid System _057010 1NZ-FXE LUBRICATION _0277983 OIL PRESSURE SWITCH A

1NZ-FXE LUBRICATION  OIL PRESSURE SWITCH  INSTALLATION  


PROCEDURE

Hide 83530 1.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.
A085603E35
1.125,0.313 1.302,0.469 0.177,0.156 10 false *1

Apply adhesive to 2 or 3 threads of the oil pressure switch.

Text in Illustration
*1 Adhesive

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent



b.

Using a 24 mm deep socket wrench, install the oil pressure switch.

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)

NOTICE:

Do not start the engine for at least 1 hour after installation.



c.

Connect the oil pressure switch connector.


Hide 2.INSPECT FOR ENGINE OIL LEAK