Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL MAIN SWITCH
RM2170E _51 Engine / Hybrid System _057012 CRUISE CONTROL _0277985 CRUISE CONTROL MAIN SWITCH G

CRUISE CONTROL  CRUISE CONTROL MAIN SWITCH  INSPECTION  


PROCEDURE

Hide 84632 1.INSPECT CRUISE CONTROL SWITCH

a.

Measure the resistance according to the value(s) in the table below.

E319149E01
5.344,1.125 5.969,0.323 5.969,0.323 6.135,0.323 false 0.281,0.125 0.594,0.323 0.313,0.198 10 false *a 4.76,0.5 5.073,0.698 0.313,0.198 10 false *c 6.198,0.24 6.51,0.438 0.313,0.198 10 false *1 6.208,1.208 6.521,1.406 0.313,0.198 10 false *b 5.146,2.417 5.458,2.615 0.313,0.198 10 false *d 3.979,2.052 4.292,2.25 0.313,0.198 10 false *e

Text in Illustration
*1 Cruise Control Switch (ON-OFF button) - -
*a Component without harness connected
(Cruise Control Switch)
*b ON-OFF
*c +/RES *d -/SET
*e CANCEL - -

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 3 Cruise control switch (ON-OFF button) released 1 MΩ or higher
Cruise control switch (ON-OFF button) pushed Below 2.5 Ω
+/RES 235 to 245 Ω
-/SET 617 to 643 Ω
CANCEL 1509 to 1571 Ω