CHECK HYBRID VEHICLE CONTROL ECU
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| A72-28 (ST1-) - G80-6 (E1) | BR - BR | Stop light switch signal | Power switch on (IG), Brake pedal released | 11 to 14 V |
| A72-28 (ST1-) - G80-6 (E1) | BR - BR | Stop light switch signal | Power switch on (IG), Brake pedal depressed | Below 1.5 V |
| A72-14 (DB2) - G80-6 (E1) | B - BR | Shift position signal | Ignition switch ON, shift lever in D | 11 to 14 V |
| A72-14 (DB2) - G80-6 (E1) | B - BR | Shift position signal | Ignition switch ON, shift lever not in D | 11 to 14 V |
| A72-26 (DB1) - G80-6 (E1) | L - BR | Shift position signal | Ignition switch ON, shift lever in D | 11 to 14 V |
| A72-26 (DB1) - G80-6 (E1) | L - BR | Shift position signal | Ignition switch ON, shift lever not in D | Below 1.5 V |
| G81-3 (BATT) - G80-6 (E1) | BE - BR | Constant power source | Always | 11 to 14 V |
| A71-15 (STP) - G80-6 (E1) | L - BR | Stop light switch signal | Brake pedal released | Below 1.5 V |
| A71-15 (STP) - G80-6 (E1) | L - BR | Stop light switch signal | Brake pedal depressed | 11 to 14 V |
| G80-6 (E1) - Body ground | BR - Body ground | Earth (ground) circuit of hybrid vehicle control ECU | Always | Below 1 Ω |
| G80-28 (CCS) - G80-6 (E1) | L - BR | Cruise control switch circuit | Power switch on (IG) | 1 MΩ or higher |
| G80-28 (CCS) - G80-6 (E1) | L - BR | Cruise control switch circuit | Power switch on (IG), Cruise control switch on | Below 2.5 Ω |
| G80-28 (CCS) - G80-6 (E1) | L - BR | Cruise control switch circuit | Power switch on (IG), +/RES switch on | 235 to 245 Ω |
| G80-28 (CCS) - G80-6 (E1) | L - BR | Cruise control switch circuit | Power switch on (IG), -/SET switch on | 617 to 643 Ω |
| G80-28 (CCS) - G80-6 (E1) | L - BR | Cruise control switch circuit | Power switch on (IG), CANCEL switch on | 1509 to 1571 Ω |