1.REMOVE FRONT DRIVE SHAFT ASSEMBLY
30900B
2.REMOVE HYBRID VEHICLE TRANSAXLE ASSEMBLY TYPE T OIL SEAL
Remove the LH side hybrid vehicle transaxle assembly type T oil seal.
Using SST, remove the hybrid vehicle transaxle assembly type T oil seal.
Remove the RH side hybrid vehicle transaxle assembly type T oil seal.
Using SST, remove the hybrid vehicle transaxle assembly type T oil seal.
30900B
3.INSTALL HYBRID VEHICLE TRANSAXLE ASSEMBLY TYPE T OIL SEAL
Install a new LH side hybrid vehicle transaxle assembly type T oil seal.
Using SST and a hammer, tap in a new hybrid vehicle transaxle assembly type T oil seal.
2.5 to 3.5 mm (0.0984 to 0.138 in.)
Coat the lip of the hybrid vehicle transaxle assembly type T oil seal with MP grease.
Install a new RH side hybrid vehicle transaxle assembly type T oil seal.
Using SST and a hammer, tap in a new hybrid vehicle transaxle assembly type T oil seal.
2.8 to 3.5 mm (0.110 to 0.138 in.)
Coat the lip of the hybrid vehicle transaxle assembly type T oil seal with MP grease.
4.INSTALL FRONT DRIVE SHAFT ASSEMBLY