Home › Drivetrain › P510 (HYBRID TRANSMISSION / TRANSAXLE) › SHIFT LEVER POSITION SENSOR › 2011.12–2017.06
RM2170E _52 Drivetrain _057013 P510 HYBRID TRANSMISSION / TRANSAXLE _0277993 SHIFT LEVER POSITION SENSOR N

P510 HYBRID TRANSMISSION / TRANSAXLE  SHIFT LEVER POSITION SENSOR  ADJUSTMENT  


PROCEDURE

Hide 89451A 1.INSPECT SHIFT LEVER POSITION SENSOR POSITION

a.

Apply the parking brake.


b.

Lock the wheels with chocks to secure the vehicle.


c.

Turn the power switch on (READY).


d.

Move the shift lever to D and release the brake.

NOTICE:

Be sure to apply the parking brake and lock the wheels with chocks to secure the vehicle.



e.
C248512E03
2.031,1.531 2.083,0.833 2.083,0.833 2.167,0.833 false 2.031,2.073 2.083,2.771 2.083,2.771 2.167,2.771 false 2.844,1.385 3.021,1.573 0.177,0.188 10 false *a 2.844,2.042 3.021,2.229 0.177,0.188 10 false *a 2.844,1.708 3.021,1.896 0.177,0.188 10 false *b 2.135,2.26 2.354,2.448 0.219,0.188 10 false (A) 2.135,1.177 2.354,1.365 0.219,0.188 10 false (B) 2.198,0.729 2.375,0.917 0.177,0.188 10 false *c 2.198,2.677 2.375,2.865 0.177,0.188 10 false *d

Slowly move the shift lever to N and measure moving distance (A) of the shift lever from the original point to the gear disengagement point.

Text in Illustration
*a Gear Disengagement Point
*b N Position
*c R Position
*d D Position

NOTICE:

Be sure to move the shift lever slowly.



f.

Move the shift lever to R and release the brake.

NOTICE:

Be sure to apply the parking brake and lock the wheels with chocks to secure the vehicle.



g.

Slowly move the shift lever to N and measure moving distance (B) of the shift lever from the original point to the vehicle disengagement point.

NOTICE:

Be sure to move the shift lever slowly.



h.

Check that moving distances (A) and (B) shown in the illustration are almost the same.

HINT:
·

If moving distances (A) and (B) are almost the same, adjustment of the shift lever position is not necessary.

·

If moving distance (A) is shorter than (B), perform adjustment of the shift lever position [*1].

·

If moving distance (B) is shorter than (A), perform adjustment of the shift lever position [*2].




Hide 89451A 2.ADJUST SHIFT LEVER POSITION SENSOR POSITION

a.

If moving distance (A) is shorter than (B). [*1]

HINT:

If the shift lever is moved from R to N, the moving distance of the shift lever from the original point to the gear disengagement point becomes longer.


i.

Move the shift lever to N.


ii.
C256278

Loosen the 2 bolts.


iii.
C256280

Slightly turn the shift lever position sensor clockwise.


iv.
C256278E04
0.917,1.844 1.042,1.99 0.125,0.146 10 true 1 2.375,0.521 2.5,0.667 0.125,0.146 10 true 2

Tighten the 2 bolts in the order shown in the illustration.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)


v.

Recheck the shift lever position sensor.



b.

If moving distance (B) is shorter than (A). [*2]

HINT:

If the shift lever is moved from D to N, the moving distance of the shift lever from the original point to the gear disengagement point becomes longer.


i.

Move the shift lever to N.


ii.
C256278

Loosen the 2 bolts.


iii.
C256279

Slightly turn the shift lever position sensor counterclockwise.


iv.
C256278E04
0.917,1.844 1.042,1.99 0.125,0.146 10 true 1 2.375,0.521 2.5,0.667 0.125,0.146 10 true 2

Tighten the 2 bolts in the order shown in the illustration.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)


v.

Recheck the shift lever position sensor.