Home › Drivetrain › P510 (HYBRID TRANSMISSION / TRANSAXLE) › SHIFT LEVER › 2011.12–2017.06
RM2170E _52 Drivetrain _057013 P510 HYBRID TRANSMISSION / TRANSAXLE _0277995 SHIFT LEVER A

P510 HYBRID TRANSMISSION / TRANSAXLE  SHIFT LEVER  REASSEMBLY  


PROCEDURE

Hide 35974 1.INSTALL LOWER POSITION INDICATOR HOUSING

a.
C249920

Engage the 4 claws and install the lower position indicator housing to the lower shift lever assembly.


Hide 35976 2.INSTALL NO. 2 POSITION INDICATOR SLIDE COVER

a.

Align the cutouts on the shank of the No. 2 position indicator slide cover and the position indicator slide cover, and install the No. 2 position indicator slide cover to the position indicator slide cover.


Hide 35975 3.INSTALL POSITION INDICATOR SLIDE COVER

a.
C249919E02
3.115,0.958 3.031,0.958 3.031,0.958 2.74,1.583 false 3.135,0.875 3.333,1.042 0.198,0.167 10 false *a

Install the position indicator slide cover to the lower position indicator housing.

Text in Illustration
*a Arrow

NOTICE:

Install the position indicator slide cover so that its arrow mark points to the front of the vehicle.



Hide 35906 4.INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY

a.
C249917

Engage the 4 clamps and connect the indicator light wire sub-assembly to the lower shift lever assembly.


b.
C258113

Install the indicator light wire sub-assembly to the lower position indicator housing.


Hide 35921B 5.INSTALL NO. 2 CONTROL POSITION INDICATOR PLATE

a.
C249914

Engage the claw and install the No. 2 control position indicator plate to the position indicator housing.


Hide 35971E 6.INSTALL POSITION INDICATOR HOUSING

a.
C258112

Engage the 4 claws and install the position indicator housing to the lower position indicator housing.