Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › FRONT DRIVE SHAFT ASSEMBLY
RM2170E _52 Drivetrain _057014 DRIVE SHAFT / PROPELLER SHAFT _0277996 FRONT DRIVE SHAFT ASSEMBLY G

DRIVE SHAFT / PROPELLER SHAFT  FRONT DRIVE SHAFT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 43420 1.INSPECT FRONT DRIVE SHAFT ASSEMBLY

a.
C211744

Check that there is no excessive play in the outboard joint.


b.

Check that the inboard joint slides smoothly in the thrust direction.


c.

Check that there is no excessive play in the radial directions of the inboard joint.


d.
C157783E13
1.5,1.646 1.771,1.833 0.271,0.188 10 false (A)

Check the boots for damage.

NOTICE:

Keep the drive shaft assembly level during inspection.


HINT:

For dimension (A), refer to the following values.


Dimension (A)
LH Side RH Side
562.1 mm (1.84 ft.) 842.1 mm (2.76 ft.)