Home › Suspension › REAR SUSPENSION › REAR SHOCK ABSORBER
RM2170E _53 Suspension _057018 REAR SUSPENSION _0278012 REAR SHOCK ABSORBER N

REAR SUSPENSION  REAR SHOCK ABSORBER  DISPOSAL  


PROCEDURE

Hide 48540 1.DISPOSE OF REAR SHOCK ABSORBER ASSEMBLY

G022405

a.

Disposal using a drill

i.

Fully extend the piston rod and secure the rear shock absorber assembly at an angle in a vise.


ii.

Using a drill, slowly make a hole at the position indicated by the arrow in the illustration to discharge the gas inside.

CAUTION:

Be careful when drilling because shards of metal may fly about, so always use proper safety equipment.


HINT:

The gas is colorless, odorless and non-poisonous.