Home › Suspension › TIRE PRESSURE MONITORING › TIRE PRESSURE WARNING VALVE › from 2015.11
RM2170E _53 Suspension _057019 TIRE PRESSURE MONITORING _0278016 TIRE PRESSURE WARNING VALVE A

TIRE PRESSURE MONITORING  TIRE PRESSURE WARNING VALVE  REMOVAL  


PROCEDURE

Hide 1.REMOVE WHEEL ASSEMBLY

Hide 42607 2.REMOVE TIRE PRESSURE WARNING VALVE AND TRANSMITTER

a.

Remove the tire valve cap.

NOTICE:

Keep the removed tire valve cap.



b.

Remove the valve core to release the air from the tire.

NOTICE:

Make sure that a sufficient amount of air has been released.



c.

Using an 11 mm socket wrench, remove the nut and washer.


d.

Drop the tire pressure warning valve and transmitter with grommet into the tire.

HINT:

The grommet may remain attached to the rim.



e.
C180021E11
2.927,0.854 2.427,0.854 false 0.365,0.771 0.979,0.771 false 2.052,1.75 2.333,1.958 0.281,0.208 10 false *b 0.167,0.688 0.313,0.865 0.146,0.177 10 false *1 2.948,0.771 3.146,0.958 0.198,0.188 10 false *a

Using a tire remover, remove the tire from the disc wheel.

Text in Illustration
*1 Tire
*a Shoe
*b 10 to 20 mm (0.394 to 0.787 in.)

NOTICE:
·

Be careful not to damage the tire pressure warning valve and transmitter due to interference between the valve and the tire bead.

·

Set the tire remover shoe as shown in the illustration.




f.

Take out the tire pressure warning valve and transmitter with grommet from the tire.


g.

Remove the grommet from the tire pressure warning valve and transmitter.