Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL(for LHD)
RM2170E _54 Brake _057022 BRAKE SYSTEM (OTHER) _0278033 BRAKE PEDAL(for LHD) A

BRAKE SYSTEM (OTHER)  BRAKE PEDAL(for LHD)  REASSEMBLY  


PROCEDURE

Hide 47121 1.INSTALL BRAKE PEDAL PAD

Hide 47124A 2.INSTALL BRAKE PEDAL SHAFT COLLAR

a.

Install the brake pedal shaft collar to the brake pedal sub-assembly.


Hide 47101B 3.INSTALL BRAKE PEDAL BUSHING

a.
C247878

Apply lithium soap base glycol grease to 2 new brake pedal bushings.

Text in Illustration
V100145

Lithium Soap Base Glycol Grease


b.

Install the 2 brake pedal bushings to the brake pedal sub-assembly.


Hide 47101 4.INSTALL BRAKE PEDAL SUB-ASSEMBLY

a.
C250005

Install the brake pedal sub-assembly to the brake pedal support sub-assembly with the brake pedal shaft and nut.

Torque:
37 N*m (375 kgf*cm, 27 ft.*lbf)

NOTICE:

Install the bolt and nut in the correct direction.