Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER PUMP(for LHD)
RM2170E _54 Brake _057022 BRAKE SYSTEM (OTHER) _0278035 BRAKE BOOSTER PUMP(for LHD) N

BRAKE SYSTEM (OTHER)  BRAKE BOOSTER PUMP(for LHD)  DISPOSAL  


PROCEDURE

Hide 47070 1.DISPOSE OF BRAKE BOOSTER PUMP ASSEMBLY

a.

Remove the accumulator from the brake booster pump assembly.


b.

Secure the accumulator in a vise.


c.
C212399E01
2.077,1.741 2.210,1.916 0.133,0.174 10 A 1.659,1.741 1.791,1.911 0.133,0.170 10 B

Using a hacksaw, make a cut in the side of the accumulator within location A to release the high-pressure gas.

Location Length
A 25 mm (0.984 in.)
B 60 mm (2.362 in.)

CAUTION:

Small pieces of metal may fly out when cutting into the accumulator. Put a cloth over the hacksaw when cutting the accumulator. Cut the accumulator slowly so that the gas will be released gradually.


HINT:

The gas is colorless, odorless and non-poisonous.