Home › Brake › BRAKE (FRONT) › FRONT BRAKE › 2011.12–2017.06
RM2170E _54 Brake _057023 BRAKE (FRONT) _0278036 FRONT BRAKE A

BRAKE (FRONT)  FRONT BRAKE  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE CYLINDER BOOT

a.
C256888E03
1.469,1.271 1.469,1.656 1.469,1.656 1.823,1.656 true 1.833,1.573 1.99,1.719 0.156,0.146 10 false *1

Using a screwdriver with its tip wrapped with vinyl tape, remove the set ring and cylinder boot from the disc brake cylinder.

Text in Illustration
*1 Vinyl Tape

NOTICE:

Be careful not to damage the brake piston or cylinder.



Hide 47731 2.REMOVE FRONT DISC BRAKE PISTON

a.
C250556

Place a piece of cloth between the front disc brake piston and disc brake cylinder.


b.

Apply compressed air to remove the front disc brake piston from the disc brake cylinder.

CAUTION:

Do not place your fingers in front of the piston when using compressed air.


NOTICE:

Do not allow any brake fluid to spatter.



Hide 3.REMOVE PISTON SEAL

a.
C256892E03
1.313,1.021 1.896,1.594 1.896,1.594 2.125,1.594 true 2.146,1.51 2.313,1.646 0.167,0.135 10 false *1

Using a screwdriver with its tip wrapped with vinyl tape, remove the piston seal from the disc brake cylinder.

Text in Illustration
*1 Vinyl Tape

NOTICE:

Do not damage the inner surface or piston seal groove of the cylinder.



Hide 31478B 4.REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

Hide 47547B 5.REMOVE FRONT DISC BRAKE BLEEDER PLUG