04474
1.INSTALL REAR WHEEL CYLINDER KIT
Apply lithium soap base glycol grease to 2 new wheel cylinder cups and the 2 pistons.
|
Lithium Soap Base Glycol Grease |
Install the 2 wheel cylinder cups to each piston.
Install the rear wheel brake cylinder compression spring to the rear wheel brake cylinder assembly.
| *1 | Cylinder Boot |
| *2 | Piston |
| *3 | Wheel Cylinder Cup |
| *4 | Rear Wheel Brake Cylinder Compression Spring |
Install the 2 pistons to the wheel brake cylinder.
Install 2 new wheel cylinder boots to the rear wheel brake cylinder assembly.