Home › Steering › STEERING COLUMN › STEERING LOCK SYSTEM › from 2014.12
RM2170E _55 Steering _057027 STEERING COLUMN _0278046 STEERING LOCK SYSTEM U

STEERING COLUMN  STEERING LOCK SYSTEM  SYSTEM DIAGRAM  


C317997E04
5.19,7.419 7.059,7.769 1.869,0.350 10 Steering Lock ECU (Steering Lock Actuator Assembly) 5.19,7.26 5.522,7.407 0.332,0.147 10 G50 5.515,6.695 5.921,6.842 0.406,0.147 10 GND 5.515,6.275 5.921,6.421 0.406,0.147 10 SLP1 5.515,5.831 5.828,5.978 0.313,0.147 10 IGE 5.515,5.373 5.828,5.520 0.313,0.147 10 LIN 5.529,0.927 5.842,1.074 0.313,0.147 10 IG2 5.529,0.395 5.712,0.542 0.184,0.147 10 B 5.356,0.287 5.540,0.434 0.184,0.147 10 7 5.356,0.825 5.540,0.971 0.184,0.147 10 6 5.328,5.728 5.511,5.875 0.184,0.147 10 3 5.328,6.163 5.511,6.309 0.184,0.147 10 4 5.328,6.606 5.511,6.753 0.184,0.147 10 1 0.863,6.317 2.744,7.000 1.881,0.684 10 Shift Lock Control ECU (Lower Shift Lever Assembly) 0.858,6.163 1.190,6.309 0.332,0.147 10 G25 0.753,7.19 1.998,7.383 1.245,0.193 10 Auxiliary Battery 3.282,0.507 4.197,0.654 0.915,0.147 10 STRG LOCK 1.755,1.03 2.031,1.177 0.276,0.147 10 IG2 3.385,1.044 4.122,1.209 0.737,0.165 10 IG2 NO. 2 2.689,1.637 2.984,1.784 0.295,0.147 10 IG2 2.843,5.373 3.249,5.520 0.406,0.147 10 IG2D 2.843,6.013 3.045,6.160 0.202,0.147 10 P 1.886,6.013 2.144,6.160 0.258,0.147 10 P2 2.143,5.924 2.326,6.071 0.184,0.147 10 2 2.556,5.822 2.782,5.968 0.226,0.147 10 25 3.74,6.69 3.998,6.837 0.258,0.147 10 11 3.336,6.275 3.622,6.421 0.285,0.147 10 SLP 1.926,2.223 2.290,2.370 0.364,0.147 10 LIN1 3.25,5.85 3.621,5.996 0.371,0.147 10 SLR+ 2.29,2.069 2.492,2.216 0.202,0.147 10 2 3.729,5.196 3.925,5.342 0.195,0.147 10 17 3.731,6.092 3.988,6.239 0.258,0.147 10 26 3.689,5.369 4.014,5.515 0.325,0.147 10 G79 3.687,6.865 4.001,7.012 0.313,0.147 10 G77 2.605,5.196 2.789,5.342 0.184,0.147 10 9 0.779,8.033 2.463,8.198 1.684,0.165 10 : LIN Communication Line 0.779,8.425 2.539,8.590 1.760,0.165 10 : CAN Communication Line 5.328,5.224 5.511,5.370 0.184,0.147 10 5 2.508,5.372 2.821,5.519 0.313,0.147 10 G77 2.503,5.999 2.797,6.145 0.295,0.147 10 G79 1.067,3.757 2.771,4.107 1.705,0.350 10 Main Body ECU (Multiplex Network Body ECU) 0.532,5.766 1.215,5.912 0.684,0.147 10 MAIN 1.083,1.03 1.352,1.177 0.269,0.147 10 P/I 3.399,5.373 3.715,5.520 0.316,0.147 10 LIN 3.731,5.667 3.914,5.814 0.184,0.147 10 29 3.689,5.848 4.002,5.995 0.313,0.147 10 G79 3.689,6.28 4.002,6.426 0.313,0.147 10 G79 1.099,2.391 1.431,2.538 0.332,0.147 10 G49 1.099,2.555 2.672,2.905 1.573,0.350 10 ID Code Box (Immobiliser Code ECU) 3.497,6.87 3.903,7.017 0.406,0.147 10 E 2.552,7.28 4.124,7.631 1.573,0.350 10 Certification ECU (Smart Key ECU Assembly)

Circuit Description
Component Outline
Steering Lock Actuator Assembly Steering Lock ECU The steering is locked and unlocked by communicating with the certification ECU (smart key ECU assembly) and ID code box (immobiliser code ECU) via LIN communication.
When the following conditions are met, the steering can be unlocked.
·

The codes (L codes) of the ID code box (immobiliser code ECU) and steering lock match.

·

The codes (S codes) of the ID code box (immobiliser code ECU) and certification ECU (smart key ECU assembly) match.

·

The certification ECU (smart key ECU assembly) and key ID codes match.


Certification ECU (Smart Key ECU Assembly) The ID code of the key the user is carrying is sent to the door control receiver.
The certification ECU (smart key ECU assembly) compares the key ID code it receives from the door control receiver with its own ID code. If they match, the certification ECU (smart key ECU assembly) permits the steering lock ECU to turn the power on, start the hybrid control system and unlock and lock the steering.
Outputs a command to supply power to the steering lock motor based on the power source mode, shift position and vehicle speed signal.
ID Code Box (Immobiliser Code ECU) Receives steering unlock or engine immobiliser unset signals from the certification ECU (smart key ECU assembly), certifies them, and transmits each unset signal to the steering lock ECU.