45184
1.INSTALL LOWER STEERING WHEEL BOSS COVER
Engage the 2 pins and 4 claws to install the lower steering wheel boss cover to the steering wheel sub-assembly.
84633
2.INSTALL CRUISE CONTROL SWITCH WIRE
84632
3.INSTALL CRUISE CONTROL MAIN SWITCH
84250A
4.INSTALL STEERING PAD SWITCH ASSEMBLY
5.ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
84307
6.ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY
45100
7.INSTALL STEERING WHEEL ASSEMBLY
Align the matchmarks on the steering wheel assembly and steering main shaft to install the steering wheel assembly.
| *a | Matchmark |
Install the steering wheel assembly set nut.
Connect the connectors to the spiral cable sub-assembly.
8.CHECK STEERING WHEEL CENTER POINT
45130
9.INSTALL HORN BUTTON ASSEMBLY