Home › Steering › STEERING COLUMN › STEERING WHEEL › 2011.12–2014.12
RM2170E _55 Steering _057027 STEERING COLUMN _0278048 STEERING WHEEL A

STEERING COLUMN  STEERING WHEEL  REMOVAL  


PROCEDURE

Hide 1.ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

Hide 45130 2.REMOVE HORN BUTTON ASSEMBLY

Hide 45100 3.REMOVE STEERING WHEEL ASSEMBLY

a.
C252595E01
0.453,0.438 0.617,0.589 0.164,0.151 10 *a 1.731,0.538 0.649,0.538 false 1.726,0.658 0.774,0.658 0.774,0.658 0.774,0.538 false

Remove the steering wheel assembly set nut.

Text in Illustration
*a Matchmark


b.

Put matchmarks on the steering wheel assembly and steering main shaft.


c.

Disconnect the connectors from the spiral cable.


d.
C252596E01
2.4,2.497 2.555,2.642 0.155,0.144 10 *a 0.759,2.987 0.927,3.142 0.167,0.155 10 *b 2.669,1.991 2.976,2.133 0.307,0.142 10 SST 2.668,0.45 2.975,0.592 0.307,0.142 10 SST 2.021,0.541 2.658,0.541 false 1.932,2.08 2.655,2.08 false

Using SST, remove the steering wheel assembly.

Text in Illustration
*a Turn
*b Hold

SST
09950-50013  (09951-05010, 09952-05010, 09953-05020, 09954-05070)

NOTICE:

Apply a small amount of grease to the threads and tip of SST (09953-05020) before use.



Hide 84250A 4.REMOVE STEERING PAD SWITCH ASSEMBLY

Hide 84633 6.REMOVE CRUISE CONTROL SWITCH WIRE

Hide 45184 7.REMOVE LOWER STEERING WHEEL BOSS COVER

a.
C206252

Disengage the 2 pins and 4 claws to remove the lower steering wheel boss cover from the steering wheel sub-assembly.