Home › Audio / Visual / Telematics › AUDIO / VIDEO › FRONT DOOR SPEAKER
RM2170E _56 Audio / Visual / Telematics _057029 AUDIO / VIDEO _0278053 FRONT DOOR SPEAKER G

AUDIO / VIDEO  FRONT DOOR SPEAKER  INSPECTION  


PROCEDURE

Hide 86160 1.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

a.

With the speaker installed, check that there is no looseness or other abnormalities.


b.

Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.


c.

for Type A:

i.
E219303E02
0.095,0.059 0.270,0.224 0.176,0.165 10 *a

Measure the resistance of the speaker.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 3.2 to 4.8 Ω


If the result is not as specified, replace the speaker.

Text in Illustration
*a Component without harness connected
(Front No. 1 Speaker Assembly)



d.

for Type B:

i.
E222247C69
0.18,0.132 0.364,0.307 0.184,0.175 10 *a

Measure the resistance of the speaker.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 3.2 to 4.8 Ω


If the result is not as specified, replace the speaker.

Text in Illustration
*a Component without harness connected
(Front No. 1 Speaker Assembly)



Hide 86160P 2.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

a.

With the speaker installed, check that there is no looseness or other abnormalities.


b.

Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.


c.
E226097E24
0.094,0.053 0.248,0.200 0.154,0.147 10 *a 0.744,2.633 0.878,2.801 0.134,0.168 10 + 1.214,2.23 1.639,2.377 0.425,0.147 10 TWR+ 2.086,2.633 2.199,2.780 0.112,0.147 10 - 2.326,2.23 2.751,2.377 0.425,0.147 10 TWR- 1.4,1.773 0.873,2.647 false 1.682,1.791 1.613,2.192 false 2.25,1.778 2.583,2.192 false 1.99,1.773 2.102,2.647 false 2.326,2.428 2.730,2.575 0.404,0.147 10 TWL- 1.214,2.428 1.618,2.575 0.404,0.147 10 TWL+ 1.716,2.23 1.922,2.377 0.206,0.147 10 *A 1.703,2.428 1.909,2.575 0.206,0.147 10 *B 2.816,2.23 3.022,2.377 0.206,0.147 10 *A 2.82,2.428 3.026,2.575 0.206,0.147 10 *B

Measure the resistance of the speaker.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (TWR-) - 3 (TWR+) Always 10 kΩ or higher
2 (-) - 1 (TWR-) Always Below 1 Ω
4 (+) - 3 (TWR+) Always Below 1 Ω
1 (TWL-) - 3 (TWL+) Always 10 kΩ or higher
2 (-) - 1 (TWL-) Always Below 1 Ω
4 (+) - 3 (TWL+) Always Below 1 Ω


If the result is not as specified, replace the speaker.

Text in Illustration
*A for RH
*B for LH
*a Component without harness connected
(Front No. 2 Speaker Assembly)


d.

When there is a possibility that either the right or left speaker is malfunctioning, interchange the speakers and perform an inspection. If the malfunction disappears after interchanging the speakers, replace the malfunctioning speaker.

HINT:

Connect all connectors to the speakers when performing an inspection. If the result is not as specified, replace the speaker.