Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM
RM2170E _56 Audio / Visual / Telematics _057029 AUDIO / VIDEO _0278060 AUDIO AND VISUAL SYSTEM J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  CD Sound Skips  


PROCEDURE

1.CHECK CD
a.
I100152

Check that the CD is not deformed or cracked.

OK:

No deformation or cracks on the CD




OK

2.CHECK CD

NG

CD IS FAULTY

2.CHECK CD
a.
I100151

Check the CD.

OK:

The CD is clean.


NOTICE:

Do not use a conventional record cleaner or anti-static preservative.


HINT:

If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.




OK

3.REPLACE CD AND RECHECK

NG

CLEAN CD

3.REPLACE CD AND RECHECK
a.

Replace the CD with a known good one and recheck that the malfunction disappears.

OK:

Malfunction disappears.




OK

CD WAS FAULTY

NG

4.CHECK RADIO RECEIVER ASSEMBLY
4.CHECK RADIO RECEIVER ASSEMBLY
a.

Check the radio receiver assembly installation condition.

i.

Check that the radio receiver assembly is properly installed.

OK:

Radio receiver assembly is properly installed.





OK

REPLACE RADIO RECEIVER ASSEMBLY

NG

REINSTALL RADIO RECEIVER ASSEMBLY PROPERLY