1. PRECAUTION
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).
58165F
2.REMOVE FRONT FLOOR COVER RH
3.DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).
4.REMOVE AUXILIARY BATTERY
Remove the 2 nuts.
Remove the battery clamp.
Open the battery terminal cap.
Loosen the nut, and disconnect the positive (+) battery terminal.
Disconnect the battery ventilation hose.
Remove the battery.
Remove the battery insulator.