Home › Power Source / Network › NETWORKING › LIN COMMUNICATION SYSTEM
RM2170E _57 Power Source / Network _057033 NETWORKING _0278069 LIN COMMUNICATION SYSTEM D

NETWORKING  LIN COMMUNICATION SYSTEM  DIAGNOSIS SYSTEM  


DESCRIPTION


The main body ECU (multiplex network body ECU) and certification ECU (smart key ECU assembly) control the LIN communication system. LIN communication system data and Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3).

When the system seems to be malfunctioning, use the intelligent tester to check for malfunctions and perform repairs.



INSPECT AUXILIARY BATTERY VOLTAGE


a.

Measure the auxiliary battery voltage with the power switch off.

Standard Voltage:

11 to 14 V


If the voltage is below 11 V, recharge or replace the auxiliary battery.