Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL SWITCH › 2011.12–2017.06
RM2170E _58 Vehicle Interior _057034 DOOR LOCK _0278070 DOOR CONTROL SWITCH G

DOOR LOCK  DOOR CONTROL SWITCH  INSPECTION  


PROCEDURE

Hide 84820 1.INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

a.

Check the operation of the power window regulator master switch assembly. (for LHD)

i.
B302422E18
2.346,1.682 2.346,0.921 2.346,0.921 2.651,0.921 false 1.11,1.684 1.11,0.967 1.11,0.967 0.841,0.967 false 2.188,1.69 2.188,0.469 2.188,0.469 2.615,0.469 false 0.206,0.217 0.398,0.388 0.192,0.171 10 *a 2.69,0.838 2.801,0.981 0.111,0.143 10 E 2.653,0.394 2.748,0.534 0.095,0.140 10 L 0.593,0.892 0.803,1.032 0.209,0.140 10 UL

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (L) - 1 (E) Lock switch pushed Below 1 Ω
Lock switch not pushed 10 kΩ or higher
9 (UL) - 1 (E) Unlock switch pushed Below 1 Ω
Unlock switch pushed 10 kΩ or higher


Text in Illustration
*a Component without harness connected
(Power Window Regulator Master Switch Assembly)

If the result is not as specified, replace the power window regulator master switch.



b.

Check the operation of the power window regulator master switch assembly. (for RHD)

i.
B302422E20
1.246,1.69 1.246,0.588 1.246,0.588 0.95,0.588 false 1.097,1.684 1.097,1.036 1.097,1.036 0.828,1.036 false 2.188,1.69 2.188,0.469 2.188,0.469 2.615,0.469 false 0.206,0.217 0.398,0.388 0.192,0.171 10 *a 0.67,0.95 0.781,1.093 0.111,0.143 10 E 2.653,0.394 2.748,0.534 0.095,0.140 10 L 0.688,0.497 0.897,0.637 0.209,0.140 10 UL

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (L) - 9 (E) Lock switch pushed Below 1 Ω
Lock switch not pushed 10 kΩ or higher
8 (UL) - 9 (E) Unlock switch pushed Below 1 Ω
Unlock switch pushed 10 kΩ or higher


Text in Illustration
*a Component without harness connected
(Power Window Regulator Master Switch Assembly)

If the result is not as specified, replace the power window regulator master switch.