POWER DOOR LOCK CONTROL SYSTEM DESCRIPTION
The power door lock system locks/unlocks all the doors.
The main body ECU (multiplex network body ECU) receives lock/unlock request signals from a door control switch or the driver door key lock and unlock switch. Then, the main body ECU (multiplex network body ECU) sends these request signals to the door lock motors in each door to lock/unlock each door in response to the inputs.
FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
| Power window regulator master switch assembly
·
Door control switch |
Driver door control switch on power window regulator master switch assembly locks or unlocks all doors. |
| Door courtesy light switch assembly | ·
Placed on each door. ·
Detects door status (open or closed) and outputs data to main body ECU (multiplex network body ECU). ·
Turns on when door is opened and turns off when door is closed. |
| Front door lock assembly LH*1
Front door lock assembly RH*2 |
·
Built-in motor locks or unlocks door. ·
Built-in key lock and unlock switch (key-linked) detects door key operation status (locked or unlocked) and outputs a signal to main body ECU (multiplex network body ECU). ·
Built-in unlock detection switch detects door status (locked or unlocked) and outputs a signal to main body ECU (multiplex network body ECU). This switch turns off when door is locked and turns on when door is unlocked. |
| Front door lock assembly RH*1
Front door lock assembly LH*2 Rear door lock assembly LH/RH |
·
Built-in motor locks or unlocks door. ·
Built-in unlock detection switch detects door status (locked or unlocked) and outputs a signal to main body ECU (multiplex network body ECU). This switch turns off when door is locked and turns on when door is unlocked. |
| Back door lock assembly | ·
Built-in motor unlatches door latch. ·
Performs back door open operation according to locked/unlocked state determination of main body ECU (multiplex network body ECU). ·
Built-in courtesy switch detects back door status (open or closed) and output data to main body ECU (multiplex network body ECU) turns on when back door is opened and turns off when back door is closed |
*1: for LHD
*2: for RHD
SYSTEM FUNCTION
This system is controlled by the main body ECU (multiplex network body ECU). The main body ECU (multiplex network body ECU) outputs signals to each door lock motor. The power door lock control system has the following functions:
| Function | Outline |
|---|---|
| Manual lock and unlock function | This function can lock or unlock all doors by the door control switch operation. |
| Key-linked lock and unlock function | This function, which is linked with the mechanical key cylinder, can lock or unlock all doors when a lock or unlock operation is effected. |
| Manual unlock prohibition function | When the condition below is met, unlocking the vehicle using the door control switch will be prohibited:
·
The doors are locked using a key-linked operation, wireless key operation or entry operation with all doors closed. |
| Key lock-in prevention function | When the key is in the vehicle, performing the door lock operation will not lock the door. |