1.CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM
The following items can be customized.
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the intelligent tester
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Customize Setting / Wireless Door Lock.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
|---|---|---|---|---|
| Wireless Control | ON | Function that turns wireless door lock | OFF or ON | Main body ECU (Multiplex network body ECU) |
| Hazard Answer Back | ON | When the doors are locked by wireless operation, the hazard warning lights flash once.
When the doors are unlocked by wireless operation, the hazard warning lights flash twice. |
OFF or ON | Main body ECU (Multiplex network body ECU) |
| Open Door Warning | ON | The buzzer sounds when lock is pressed when any of the doors are ajar. | OFF or ON | Main body ECU (Multiplex network body ECU) |
| Auto Lock Time | 30 s | Function that regulates the interval between unlocking and automatic relocking of doors | 30 s, 60 s or 120 s | Main body ECU (Multiplex network body ECU) |
| Wireless Buzzer Resp | ON | Wireless door lock buzzer response | OFF or ON | Main body ECU (Multiplex network body ECU) |
| Wireless Buzzer Vol | Level 5*1
Level 7*2 |
Wireless door lock buzzer volume | Level 7, Level 6, Level 5, Level 4, Level 3, Level 2, Level 1 or Level0 | Main body ECU (Multiplex network body ECU) |
*1: w/ LED Headlight
*2: w/o LED Headlight