Home › Vehicle Interior › DOOR LOCK › FRONT DOOR LOCK
RM2170E _58 Vehicle Interior _057034 DOOR LOCK _0278074 FRONT DOOR LOCK G

DOOR LOCK  FRONT DOOR LOCK  INSPECTION  


PROCEDURE

Hide 69320 1.INSPECT FRONT DOOR LOCK ASSEMBLY LH

a.
B171377E30
2.704,3.234 2.853,3.376 0.149,0.142 10 *b 2.141,3.569 2.290,3.711 0.149,0.142 10 *c 0.087,0.088 0.243,0.235 0.156,0.147 10 *a

Check the operation of the front door lock motor.

i.

Apply auxiliary battery voltage and check the operation of the front door lock motor.

OK:
Measurement Condition Specified Condition
Auxiliary battery positive (+) → 4 (L)
Auxiliary battery negative (-) → 1 (UL)
Locks
Auxiliary battery positive (+) → 1 (UL)
Auxiliary battery negative (-) → 4 (L)
Unlocks


Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly LH)
*b Unlock
*c Lock

If the result is not as specified, replace the front door lock assembly LH.



b.
B171377E30
2.704,3.234 2.853,3.376 0.149,0.142 10 *b 2.141,3.569 2.290,3.711 0.149,0.142 10 *c 0.087,0.088 0.243,0.235 0.156,0.147 10 *a

Check the resistance of the door unlock detection switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
7 (E) - 8 (LSSR) Locked 10 kΩ or higher
Unlocked Below 1 Ω


Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly LH)
*b Unlock
*c Lock

If the result is not as specified, replace the front door lock assembly LH.



c.
B164389E21
2.93,1.33 3.079,1.472 0.149,0.142 10 *c 2.695,2.368 2.844,2.510 0.149,0.142 10 *b 0.161,0.122 0.313,0.264 0.151,0.142 10 *a

Check the resistance of the door lock and unlock switch. (for LHD)

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
7 (E) - 9 (L) Turned to lock Below 1 Ω
Not turned 10 kΩ or higher
7 (E) - 10 (UL) Turned to unlock Below 1 Ω
Not turned 10 kΩ or higher


Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly LH)
*b Unlock
*c Lock

If the result is not as specified, replace the front door lock assembly LH.



Hide 69310 2.INSPECT FRONT DOOR LOCK ASSEMBLY RH

a.
B171378E31
0.07,0.061 0.226,0.204 0.156,0.143 10 *a 0.59,3.337 0.739,3.474 0.149,0.137 10 *b 1.127,3.651 1.276,3.788 0.149,0.137 10 *c

Check the operation of the front door lock motor.

i.

Apply auxiliary battery voltage and check the operation of the front door lock motor.

OK:
Measurement Condition Specified Condition
Auxiliary battery positive (+) → 4 (L)
Auxiliary battery negative (-) → 1 (UL)
Locks
Auxiliary battery positive (+) → 1 (UL)
Auxiliary battery negative (-) → 4 (L)
Unlocks


Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly RH)
*b Unlock
*c Lock

If the result is not as specified, replace the front door lock assembly RH.



b.
B171378E31
0.07,0.061 0.226,0.204 0.156,0.143 10 *a 0.59,3.337 0.739,3.474 0.149,0.137 10 *b 1.127,3.651 1.276,3.788 0.149,0.137 10 *c

Check the resistance of the door unlock detection switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
7 (LSSR) - 8 (E) Locked 10 kΩ or higher
Unlocked Below 1 Ω


Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly RH)
*b Unlock
*c Lock

If the result is not as specified, replace the front door lock assembly RH.



c.
B284859E10
0.75,3.427 0.75,4.438 0.75,4.438 0.906,4.438 false 1.052,3.427 1.052,4.135 1.052,4.135 1.208,4.135 false 1.208,3.427 1.208,3.823 1.208,3.823 1.365,3.823 false 0.958,4.354 1.104,4.51 0.146,0.156 10 false E 1.26,4.042 1.375,4.198 0.115,0.156 10 false L 1.406,3.729 1.615,3.885 0.208,0.156 10 false UL 0.083,0.052 0.229,0.219 0.146,0.167 10 false *a 0.604,1.615 0.75,1.781 0.146,0.167 10 false *b 0.344,0.51 0.49,0.677 0.146,0.167 10 false *c

Check the resistance of the door lock and unlock switch. (for RHD)

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
6 (L) - 8 (E) Turned to lock Below 1 Ω
Not turned 10 kΩ or higher
6 (UL) - 8 (E) Turned to unlock Below 1 Ω
Not turned 10 kΩ or higher


Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly RH)
*b Unlock
*c Lock

If the result is not as specified, replace the front door lock assembly RH.