Home › Vehicle Interior › DOOR LOCK › REAR DOOR LOCK
RM2170E _58 Vehicle Interior _057034 DOOR LOCK _0278075 REAR DOOR LOCK G

DOOR LOCK  REAR DOOR LOCK  INSPECTION  


PROCEDURE

Hide 69340 1.INSPECT REAR DOOR LOCK ASSEMBLY LH

a.
B164415E15
0.13,0.123 0.279,0.261 0.149,0.137 10 *a 2.28,3.907 2.429,4.044 0.149,0.137 10 *b 1.792,3.907 1.941,4.044 0.149,0.137 10 *c

Check the operation of the door lock motor.

i.

Apply auxiliary battery voltage and check the operation of the rear door lock motor.

OK:
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 4 (L)
Auxiliary battery negative (-) → Terminal 1 (UL)
Locks
Auxiliary battery positive (+) → Terminal 1 (UL)
Auxiliary battery negative (-) → Terminal 4 (L)
Unlocks


Text in Illustration
*a Component without harness connected
(Rear Door Lock Assembly LH)
*b Unlock
*c Lock

If the result is not as specified, replace the rear door lock assembly LH.



b.
B164415E15
0.13,0.123 0.279,0.261 0.149,0.137 10 *a 2.28,3.907 2.429,4.044 0.149,0.137 10 *b 1.792,3.907 1.941,4.044 0.149,0.137 10 *c

Check the resistance of the unlock detection switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
6 (LSSR) - 9 (E) Locked 10 kΩ or higher
Unlocked Below 1 Ω


Text in Illustration
*a Component without harness connected
(Rear Door Lock Assembly LH)
*b Unlock
*c Lock

If the result is not as specified, replace the rear door lock assembly LH.



Hide 69330 2.INSPECT REAR DOOR LOCK ASSEMBLY RH

a.
B164416E13
0.118,0.101 0.267,0.238 0.148,0.137 10 *a 2.48,3.99 2.629,4.128 0.149,0.139 10 *c 1.97,3.99 2.121,4.128 0.151,0.139 10 *b

Check the operation of the rear door lock motor.

i.

Apply auxiliary battery voltage and check the operation of the rear door lock motor.

OK:
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 4 (L)
Auxiliary battery negative (-) → Terminal 1 (UL)
Locks
Auxiliary battery positive (+) → Terminal 1 (UL)
Auxiliary battery negative (-) → Terminal 4 (L)
Unlocks


Text in Illustration
*a Component without harness connected
(Rear Door Lock Assembly RH)
*b Unlock
*c Lock

If the result is not as specified, replace the rear door lock assembly RH.



b.
B164416E13
0.118,0.101 0.267,0.238 0.148,0.137 10 *a 2.48,3.99 2.629,4.128 0.149,0.139 10 *c 1.97,3.99 2.121,4.128 0.151,0.139 10 *b

Check the operation of the unlock detection switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
6 (LSSR) - 9 (E) Locked 10 kΩ or higher
6 (LSSR) - 9 (E) Unlocked Below 1 Ω


Text in Illustration
*a Component without harness connected
(Rear Door Lock Assembly RH)
*b Unlock
*c Lock

If the result is not as specified, replace the rear door lock assembly RH.