81260A
1.REMOVE MAP LIGHT ASSEMBLY
Inspect the personal lights.
Connect a positive (+) lead from the auxiliary battery to terminal 3 (B) and a negative (-) lead to terminal 1 (E) or 2 (CTY).
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 (B) - 1 (E) | Personal light switches off | Personal light LH and RH do not come on |
| Personal light switch LH on | Personal light LH comes on | |
| Personal light switch RH on | Personal light RH comes on | |
| Personal light switches off and interior light door switch ON | Personal light LH and RH comes on | |
| 3 (B) - 2 (CTY) | Personal light switches off and interior light door switch off | Personal light LH and RH do not come on |
| Personal light switches off and interior light door switch DOOR | Personal light LH and RH comes on |
| *a | Component without harness connected
(Map Light Assembly) |
If the result is not as specified, replace the bulb or map light assembly.