Home › Vehicle Interior › LIGHTING (INT) › PERSONAL LIGHT
RM2170E _58 Vehicle Interior _057036 LIGHTING (INT) _0278088 PERSONAL LIGHT A

LIGHTING (INT)  PERSONAL LIGHT  REMOVAL  


PROCEDURE

Hide 81260A 1.REMOVE MAP LIGHT ASSEMBLY

a.
E236388E01
0.674,3.063 0.446,2.798 0.446,2.798 0.83,3.021 false 0.257,2.667 0.417,2.817 0.160,0.150 10 *a 1.619,3.405 1.962,4.311 1.962,4.311 1.441,3.431 false 1.91,4.332 2.070,4.482 0.160,0.150 10 *a 2.43,3.806 3.019,4.18 3.019,4.18 2.278,3.803 false 3.049,4.124 3.209,4.274 0.160,0.150 10 *a

Using a moulding remover, disengage the 4 claws.

Text in Illustration
*a Contact Portion

NOTICE:

Do not touch the metal plates, especially the contact portions, as it may cause a malfunction such as the light does not illuminate.



b.

Disconnect the connector and remove the map light assembly.


Hide 81363 2.REMOVE OUTER ROOM LIGHT LENS

a.
E236394

Disengage the 6 claws and remove the outer room light lens.


Hide 81260C 3.REMOVE MAP LIGHT BULB

a.

Remove the 2 map light bulbs from the map light assembly.