COMBINATION METER ASSEMBLY
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| G1-1 (B) - Body ground | L - Body ground | Battery | Power switch off | 11 to 14 V |
| G1-2 (L) - Body ground | V - Body ground | Fuel signal | Power switch on (IG), fuel level not low | 4 V or less |
| Power switch on (IG), fuel level low | 4 to 14 V | |||
| G1-12 (SW) - Body ground | BE - Body ground | Front passenger seat belt buckle switch signal | Power switch on (IG), front passenger seat occupied, and front passenger seat belt unfastened | Below 1 Ω |
| Power switch on (IG), front passenger seat occupied, and front passenger seat belt fastened | 10 kΩ or higher | |||
| G1-13 (LP) - Body ground | LG - Body ground | Security indicator light signal | Power switch on (IG), security indicator light off | Below 1 V |
| Power switch on (IG), security indicator light blinks | 3.5 to 8.5 V ←→ 11 to 14 V | |||
| G1-20 (ET) - Body Ground | BR - Body ground | Ground | Always | Below 1 Ω |
| G1-21 (IG+) - Body ground | B - Body ground | Power switch signal | Power switch off | Below 1 V |
| Power switch on (IG) | 11 to 14 V | |||
| G1-22 (S) - Body ground | GR - Body ground | Oil pressure signal | Power switch on (IG), oil pressure warning light off | 4 to 6 V |
| Power switch on (IG), washer warning light on | Below 1 V | |||
| G1-23 (LVWG)*3 - Body ground | W - Body ground | Headlight leveling warning light signal | Power switch on (IG), headlight leveling warning light off | Below 1 V |
| Power switch on (IG), headlight leveling warning light on | 11 to 14 V | |||
| G1-24 (EFI) - Body ground | B - Body ground | MIL (Check engine warning light) signal | Power switch on (IG), MIL off | 11 to 14 V |
| Power switch on (IG), MIL on | Below 1 V | |||
| G1-29 (ILL+) - Body ground | R - Body ground | Illumination signal | Light control switch off | Below 1 V |
| Light control switch on TAIL or HEAD position | 11 to 14 V | |||
| G1-30 (MSFM) - Body ground | W - Body ground | Multi-information switch (steering pad switch assembly) signal | Power switch on | Pulse generation |
| G1-31 (CANH) - Body ground | G - Body ground | CAN communication line | - | - |
| G1-32 (CANL) - Body ground | W - Body ground | CAN communication line | - | - |
| G1-39 (+S) - Body ground | SB - Body ground | Speed signal for other system (Output) | Power switch on (IG), wheel being rotated | Pulse generation (See waveform 1) |
| G1-40 (SI) - Body ground | V - Body ground | Speed signal for other system (Input) | Power switch on (IG), wheel being rotated | Pulse generation (See waveform 1) |
| G3-1 (B) - Body ground | R - Body ground | Battery | Power switch off | 11 to 14 V |
| G3-2 (-) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| G3-3 (HAZ) - Body ground | B - Body ground | Hazard warning switch signal | Power switch on (IG), hazard warning switch not pressed | 11 to 14 V |
| Power switch on (IG), hazard warning switch pressed | Below 1 V | |||
| G3-4 (+) - Body ground | GR - Body ground | High beam signal | Power switch on (IG), high beam off | Below 1 V |
| Power switch on (IG), high beam on | 11 to 14 V | |||
| G3-6 (TAIL) - Body ground | R - Body ground | Tail indicator light signal | Power switch on (IG), tail indicator light off | Below 1 V |
| Power switch on (IG), tail indicator light on | 11 to 14 V | |||
| G3-7 (LR) - Body ground | G - Body ground | RH turn indicator light signal | RH turn indicator light off | 11 to 14 V |
| RH turn indicator light blinks | 11 to 14 V ←→ Below 1 V | |||
| G3-9 (ER) - Body ground | B - Body ground | RH turn signal switch signal | Power switch on (IG), RH turn signal switch off | 11 to 14 V |
| Power switch on (IG), RH turn signal switch on | Below 1 V | |||
| G3-10 (EL) - Body ground | Y - Body ground | LH turn signal switch signal | Power switch on (IG), LH turn signal switch off | 11 to 14 V |
| Power switch on (IG), LH turn signal switch on | Below 1 V | |||
| G3-11 (S)*1 - Body ground | SB - Body ground | Rear fog indicator light signal | Power switch on (IG), rear fog indicator light off | Below 1 V |
| Power switch on (IG), rear fog indicator light on | 11 to 14 V | |||
| G3-12 (FOG)*2 - Body ground | BE - Body ground | Front fog indicator light signal | Power switch on (IG), rear fog indicator light off | Below 1 V |
| Power switch on (IG), rear fog indicator light on | 11 to 14 V | |||
| G3-13 (LL) - Body ground | LG - Body ground | LH turn indicator light signal | LH turn indicator light off | 11 to 14 V |
| LH turn indicator light blinks | 11 to 14 V ←→ Below 1 V |
*1: w/ Rear Fog Light
*2: w/ Front Fog Light
*3: for LED Headlight
Waveform 1 (Reference):
| Item | Condition |
|---|---|
| Tool setting | 5 V/DIV., 20 ms./DIV. |
| Vehicle condition | Wheel being rotated |
When the system is functioning normally, one wheel revolution generates 4 pulses. As the vehicle speed increases, the width indicated by (A) in the illustration narrows.
COMBINATION METER ASSEMBLY INNER CIRCUIT