Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2011.12–2017.06
RM2170E _58 Vehicle Interior _057037 METER / GAUGE / DISPLAY _0278095 METER / GAUGE SYSTEM A

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  CUSTOMIZE PARAMETERS  


PROCEDURE

Hide 1.CUSTOMIZE METER / GAUGE SYSTEM

a.

Customizing with the intelligent tester

i.

Connect the intelligent tester to the DLC3.


ii.

Turn the power switch on (IG).


iii.

Turn the intelligent tester on.


iv.

Enter the following menus: Customize Setting / Combination Meter / Warning.


v.

Select the setting by referring to the table below.

NOTICE:

Be sure to record the current value before customizing.



Warning
Tester Display Default Content Setting Relevant ECU
Key Remind Sound Slow Function to change the cycle of the key remind warning buzzer Normal, Slow, Fast Combination meter assembly
Driver Side Seatbelt Warning Buzzer*1 ON Function to turn on/off the seat belt warning buzzer ON or OFF Combination meter assembly
Front Passenger Side Seatbelt Warning Buzzer*1 ON Function to turn on/off the seat belt warning buzzer ON or OFF Combination meter assembly

*1: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more




b.

Customizing with the combination meter assembly

HINT:
·

Press and hold the DISP switch to enter an item.

·

Briefly press the DISP switch to select an item.



i.

Turn the power switch on (IG).


ii.

Enter the following menus: SETTINGS.


iii.

Select the setting by referring to the table below.

NOTICE:

Be sure to record the current value before customizing.



Basic Settings
Combination meter assembly display Default Content Setting Relevant ECU
Date - To adjust the date - Combination meter assembly
Clock - To adjust the date - Combination meter assembly
Clock Mode 24H To select clock mode 24H or 12H Combination meter assembly
Steering Switch ON To select the steering pad switch display OFF or ON Combination meter assembly
Language English To select the language English, Spanish, French Combination meter assembly

Set ECO Savings
Combination meter assembly display Default Content Setting Relevant ECU
Gasoline Price *1 To select the gasoline price $/gal. or $/L Combination meter assembly
Fuel Cons. Comparison *1 To select the fuel consumption unit MPG or L/100km Combination meter assembly
ECO Savings Basic To select the eco savings display setting Basic or Details Combination meter assembly

*1: Changes according to the vehicle specification

Menu Screen Selection
Combination meter assembly display Default Content Setting Relevant ECU
ECO Savings Record OFF Display or not display eco savings record OFF or ON Combination meter assembly
5 min. consumption OFF Display or not display 5 minutes fuel consumption OFF or ON Combination meter assembly
Past Record OFF Display or not display fuel consumption record Monthly Avg. or Own Best Combination meter assembly

Screen Off
Combination meter assembly display Default Content Setting Relevant ECU
Basic Settings ON Display or not display the selected item - Combination meter assembly

Set Clock
Combination meter assembly display Default Content Setting Relevant ECU
Hour - To adjust the hour - Combination meter assembly
Minute - To adjust the minute - Combination meter assembly
Second - To adjust the second - Combination meter assembly


iv.

Press and hold the DISP switch.


v.

Return to the item selection screen.