Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM › from 2014.12
RM2170E _58 Vehicle Interior _057039 SUPPLEMENTAL RESTRAINT SYSTEMS _0278099 AIRBAG SYSTEM C

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM  B1000/31  Center Airbag Sensor Assembly Malfunction  


DESCRIPTION

The airbag sensor assembly consists of the deceleration sensor, safing sensor, drive circuit, diagnosis circuit, ignition control, etc.

If the airbag sensor assembly receives signals from the deceleration sensor, it determines whether or not the airbag squib and pretensioner squib should be activated.

DTC B1000/31 is stored when a malfunction is detected in the airbag sensor assembly.

DTC No. DTC Detection Condition Trouble Area
B1000/31 Airbag sensor assembly malfunction Airbag sensor assembly

PROCEDURE

1.CHECK DTC
a.

Check for DTCs (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).

Result:
Result Proceed to
DTC B1000/31 is output A
DTC B1000/31 and other DTCs are output B



NOTICE:

If only DTC B1000/31 is output, do not clear the DTC, replace the airbag sensor assembly.


HINT:

If any DTCs other than DTC B1000/31 are also output, troubleshoot those DTCs first.



A

B