Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM › 2014.12–2015.11
RM2170E _58 Vehicle Interior _057039 SUPPLEMENTAL RESTRAINT SYSTEMS _0278099 AIRBAG SYSTEM C

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM  B161A/8A  Lost Communication with Front Satellite Sensor Bus  


DESCRIPTION

The front collision sensor circuit (front airbag sensor RH circuit and front airbag sensor LH circuit) is composed of the airbag sensor assembly, front airbag sensor RH and front airbag sensor LH.

The front airbag sensor RH and front airbag sensor LH detect impacts to the vehicle and send signals to the airbag sensor assembly to determine if the airbag and pretensioner should be deployed.

DTC B161A/8A is stored when a malfunction is detected in the front collision sensor circuit (front airbag sensor RH circuit and front airbag sensor LH circuit).

DTC No. DTC Detection Condition Trouble Area
B161A/8A
·

The airbag sensor assembly receives a line short circuit signal, an open circuit signal, a short circuit to ground signal or a short circuit to B+ signal in the front collision sensor circuit (front airbag sensor RH circuit and front airbag sensor LH circuit).

·

Front airbag sensor RH malfunction

·

Front airbag sensor LH malfunction

·

Airbag sensor assembly malfunction


·

Instrument panel wire

·

Engine room main wire

·

Front airbag sensor RH

·

Front airbag sensor LH

·

Airbag sensor assembly



WIRING DIAGRAM

C238365E25
0.583,2.156 0.854,2.323 0.271,0.167 10 false A23 0.573,2.323 2.083,2.49 1.51,0.167 10 false Front Airbag Sensor RH 5.51,4.75 5.938,5.021 0.427,0.271 10 false G18 5.51,4.917 7.073,5.125 1.563,0.208 10 false Airbag Sensor Assembly 1.521,0.844 1.854,1.021 0.333,0.177 10 false +SR 3.438,0.844 3.74,1.021 0.302,0.177 10 false AG5 5.313,0.74 5.75,1.021 0.438,0.281 10 false 29 5.313,1.542 5.875,1.917 0.563,0.375 10 false 27 1.906,0.719 2.01,0.865 0.104,0.146 10 false 2 3.542,0.594 3.646,0.74 0.104,0.146 10 false 1 3.438,1.646 3.76,1.823 0.323,0.177 10 false AG5 3.542,1.396 3.646,1.542 0.104,0.146 10 false 2 1.563,1.656 1.844,1.833 0.281,0.177 10 false -SR 5.563,0.833 6.094,1.104 0.531,0.271 10 false +SR 5.563,1.625 6.115,1.958 0.552,0.333 10 false -SR 1.906,1.51 2.01,1.656 0.104,0.146 10 false 1 0.594,4.771 0.906,4.938 0.313,0.167 10 false A24 0.594,4.917 2.104,5.083 1.51,0.167 10 false Front Airbag Sensor LH 1.552,3.385 1.885,3.563 0.333,0.177 10 false +SL 3.438,3.406 3.792,3.583 0.354,0.177 10 false AG5 5.313,3.302 5.854,3.677 0.542,0.375 10 false 30 5.302,4.115 5.667,4.385 0.365,0.271 10 false 28 1.906,3.281 2.01,3.427 0.104,0.146 10 false 2 3.542,3.177 3.646,3.323 0.104,0.146 10 false 3 3.438,4.208 3.76,4.385 0.323,0.177 10 false AG5 3.542,3.979 3.646,4.125 0.104,0.146 10 false 4 1.573,4.219 1.854,4.396 0.281,0.177 10 false -SL 5.563,3.385 6.188,3.74 0.625,0.354 10 false +SL 5.563,4.198 5.979,4.458 0.417,0.26 10 false -SL 1.906,4.073 2.01,4.219 0.104,0.146 10 false 1

PROCEDURE

1.CHECK DTC
a.

Turn the power switch on (IG), and wait for at least 60 seconds.


b.

Turn the power switch off.

HINT:

If a communication error occurs, DTCs for both the LH and RH sides will be stored simultaneously. To identify the malfunctioning area, turn the power switch off and then on (IG) again.



c.

Turn the power switch on (IG), and wait for at least 60 seconds.


d.

Check for DTCs (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).

Result:
Result Proceed to
DTCs B1613/83 and B1618/84 are not output. A
DTC B1613/83 is output. B
DTC B1618/84 is output. C


HINT:
·

DTCs indicating communication errors will be changed to DTCs indicating errors in initialization by turning the power switch off and then on (IG) again.

·

Codes other than DTCs B1613/83 and B1618/84 may be output at this time, but they are not related to this check.





A

2.CHECK DTC

B

C

2.CHECK DTC

b.

Turn the power switch off.


c.

Turn the power switch on (IG), and wait for at least 60 seconds.


d.

Check for DTCs (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).

OK:

DTC B161A/8A is not output.


HINT:

Codes other than DTC B161A/8A may be output at this time, but they are not related to this check.




OK

NG