Be sure to read Precaution thoroughly before servicing (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION).
Wear protective gloves. Sharp areas on the parts may injure your hands.
If a front seat airbag assembly has been deployed, replace the front seat airbag assembly, separate type front seatback spring assembly, separate type front seatback cover and separate type front seatback pad with the necessary parts in accordance with the extent of the collision damage (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(w/ Non-removable Headrest)>DISASSEMBLY).
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
1.REMOVE FRONT SEAT ASSEMBLY
71074S
2.DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER
73920A
3.SEPARATE FRONT SEAT AIRBAG ASSEMBLY
4.REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
73920A
5.REMOVE FRONT SEAT AIRBAG ASSEMBLY
Disengage the 2 clamps.
Remove the 2 nuts and front seat airbag assembly.
Do not reuse the nuts.
Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.