Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY(for Separate Type Seatback) › 2011.12–2017.06
RM2170E _58 Vehicle Interior _057040 SEAT _0278112 REAR SEAT ASSEMBLY(for Separate Type Seatback) A

SEAT  REAR SEAT ASSEMBLY(for Separate Type Seatback)  INSTALLATION  


PROCEDURE

Hide 72693 1.INSTALL REAR SEAT CUSHION LOCK HOOK

a.
B296148

Engage the 2 claws to install the rear seat cushion lock hook.

HINT:

Use the same procedure for the RH side and the LH side.



Hide 2.INSTALL REAR SEAT CUSHION ASSEMBLY

a.

Place the rear seat cushion assembly in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.
B296199

Push out the seat belt buckles from the back of the rear seat cushion assembly so that they are positioned as shown in the illustration.


c.
B296198

Engage the hook of the rear seat cushion assembly to the CRS anchor bracket.


d.
B296116

Engage the 2 rear seat cushion lock hooks to install the rear seat cushion assembly as shown in the illustration.


e.

Confirm that the seat cushion is firmly installed.

NOTICE:

When installing the seat cushion, make sure that the seat belt buckles are not under the seat cushion.



f.

Engage the 2 clips.


Hide 3.INSTALL REAR SEATBACK ASSEMBLY LH

a.

Place the rear seatback assembly LH in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.

Install the rear seatback assembly LH with the 2 bolts.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


c.

Raise the rear seatback assembly LH.


Hide 4.INSTALL REAR SEATBACK ASSEMBLY RH

a.

Place the rear seatback assembly RH in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.

Install the rear seatback assembly RH with the 2 bolts.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


c.

Raise the rear seatback assembly RH.


Hide 58167H 5.INSTALL FRONT CENTER FLOOR COVER

a.

Engage the 2 guides to install the front center floor cover.


b.

Install the 3 clips.


Hide 58166B 6.INSTALL FRONT FLOOR COVER LH

a.

Engage the 3 guides.


b.
B301490E02
1.167,0.375 1.49,0.625 0.323,0.25 10 false <A> 1.281,1.688 1.604,1.938 0.323,0.25 10 false <B> 0.781,1.073 1.104,1.323 0.323,0.25 10 false <B> 0.573,0.396 0.896,0.646 0.323,0.25 10 false <B> 2.219,0.104 2.542,0.354 0.323,0.25 10 false <A>

Engage the clip <B> to install the front floor cover LH.


c.

Install the 2 clips <A>.


Hide 58165F 7.INSTALL FRONT FLOOR COVER RH

a.

Engage the 3 guides.


b.
B301488E04
2.927,2.052 3.229,2.24 0.302,0.188 10 false <B> 2.865,1.76 3.167,1.948 0.302,0.188 10 false <B> 2.979,2.417 3.281,2.604 0.302,0.188 10 true <B> 0.927,2.354 1.229,2.542 0.302,0.188 10 false <A> 1.917,2.198 2.219,2.385 0.302,0.188 10 true <A>

Engage the clip <B> to install the front floor cover RH.


c.

Install the 2 clips <A>.


Hide 71960B 8.INSTALL REAR CENTER SEAT HEADREST ASSEMBLY

Hide 71940A 9.INSTALL REAR SEAT HEADREST ASSEMBLY