Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY(for Separate Type Seatback) › 2011.12–2017.06
RM2170E _58 Vehicle Interior _057040 SEAT _0278112 REAR SEAT ASSEMBLY(for Separate Type Seatback) A

SEAT  REAR SEAT ASSEMBLY(for Separate Type Seatback)  DISASSEMBLY  


PROCEDURE

Hide 72661C 1.REMOVE REAR SEATBACK LOCK RELEASE BUTTON (for LH Side)

a.
B296119

Turn the rear seatback lock release button in the direction indicated by arrow to remove it.


Hide 72646A 2.REMOVE REAR SEATBACK STOP BUTTON GROMMET (for LH Side)

a.
B296124E04
0.875,2.292 0.813,2.583 true 0.719,2.583 0.917,2.771 0.198,0.188 10 false *1

Press down the separate type rear seatback cover with pad as shown in the illustration to check the slit position of the rear seatback stop button grommet.

Text in Illustration
*1 Slit


b.
B296126E04
1.875,1.958 1.594,2.365 true 1.469,2.354 1.667,2.604 0.198,0.25 10 false *1

Using needle nose pliers wrapped with protective tape, disengage the 2 claws and remove the rear seatback stop button grommet from the separate type rear seatback cover with pad.

Text in Illustration
*1 Protective Tape

NOTICE:
·

Do not damage the rear seatback cover or rear seatback stop button grommet.

·

Insert the needle nose pliers parallel to the slit and disengage the claws.

·

If the needle nose pliers are inserted perpendicular to the slit, the rear seatback stop button grommet may be damaged.




Hide 3.REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)

a.
B296153

Using a clip remover, remove the 3 clips.


b.
B296154

Using a clip remover, remove the 2 clips.


c.
B296155

Open the 2 fasteners as shown in the illustration.


d.
B296157

Disengage the hook.


e.
B296158

Disengage the 4 claws and remove the 2 rear center seat headrest supports from the rear seatback frame sub-assembly LH.


f.
B296159

Disengage the 4 claws and remove the 2 rear seat headrest supports from the rear seatback frame sub-assembly LH.


g.

Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly LH.


Hide 71078S 4.REMOVE SEPARATE TYPE REAR SEATBACK COVER

a.
B296160

Remove the 2 hog rings and separate type rear seatback cover from the separate type rear seatback pad.


Hide 72640A 5.REMOVE REAR SEATBACK LOCK ASSEMBLY LH

a.
B296162

Remove the 2 bolts and rear seatback lock assembly LH from the rear seatback frame subassembly LH.


Hide 72661C 6.REMOVE REAR SEATBACK LOCK RELEASE BUTTON (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 72646A 7.REMOVE REAR SEATBACK STOP BUTTON GROMMET (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 8.REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)

a.
B296163

Using a clip remover, remove the 2 clips.


b.
B296164

Using a clip remover, remove the 2 clips.


c.
B296165

Open the 2 fasteners as shown in the illustration.


d.
B296167

Disengage the hook.


e.
B296168

Disengage the 4 claws and remove the 2 rear seat headrest supports from the rear seatback frame sub-assembly RH.


f.

Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly RH.


Hide 71077S 9.REMOVE SEPARATE TYPE REAR SEATBACK COVER (for RH Side)

a.
B296170

Remove the 2 hog rings and separate type rear seatback cover from the separate type rear seatback pad.


Hide 72630C 10.REMOVE REAR SEATBACK LOCK ASSEMBLY RH

a.
B296169

Remove the 2 bolts and rear seatback lock assembly RH.


Hide 71075B 11.REMOVE BENCH TYPE REAR SEAT CUSHION COVER

a.

Remove the 38 hog rings.

B299287


b.

Remove the 16 hog rings and bench type rear seat cushion cover from the bench type rear seat cushion pad.

B297710