Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY(for Separate Type Seatback) › 2011.12–2017.06
RM2170E _58 Vehicle Interior _057040 SEAT _0278112 REAR SEAT ASSEMBLY(for Separate Type Seatback) A

SEAT  REAR SEAT ASSEMBLY(for Separate Type Seatback)  REASSEMBLY  


PROCEDURE

Hide 71075B 1.INSTALL BENCH TYPE REAR SEAT CUSHION COVER

a.

Temporarily install the bench type rear seat cushion cover to the bench type rear seat cushion pad.


b.

Using hog ring pliers, install the bench type rear seat cushion cover to the bench type rear seat cushion pad with 16 new hog rings.

B297711

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




c.

Using hog ring pliers, install 38 new hog rings.

B299288

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




Hide 72640A 2.INSTALL REAR SEATBACK LOCK ASSEMBLY LH

a.
B296162

Install the rear seatback lock assembly LH to the rear seatback frame sub-assembly LH with the 2 bolts.

Torque:
32 N*m (326 kgf*cm, 24 ft.*lbf)


Hide 71078S 3.INSTALL SEPARATE TYPE REAR SEATBACK COVER (for LH Side)

a.

Temporarily install the separate type rear seatback cover to the separate type rear seatback pad.


b.
B296161

Using hog ring pliers, install the separate type rear seatback cover to the separate type rear seatback pad with 2 new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




Hide 4.INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)

a.

Temporarily install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly LH.


b.
B296159

Engage the 4 claws to install the 2 rear seat headrest supports to the rear seatback frame sub-assembly LH.


c.
B296158

Engage the 4 claws to install the 2 rear center seat headrest supports to the rear seatback frame sub-assembly LH.


d.
B296157

Engage the hook.


e.
B296156

Close the 2 fasteners as shown in the illustration.


f.
B296154

Install the 2 clips.


g.
B296153

Install the 3 clips.


Hide 72646A 5.INSTALL REAR SEATBACK STOP BUTTON GROMMET (for LH Side)

a.
B307875

Engage the 2 claws to install the rear seatback stop button grommet to the separate type rear seatback cover with pad.


Hide 72661C 6.INSTALL REAR SEATBACK LOCK RELEASE BUTTON (for LH Side)

a.
B296120

Turn the rear seatback lock release button in the direction indicated by arrow to install it.


Hide 72630C 7.INSTALL REAR SEATBACK LOCK ASSEMBLY RH

a.
B296169

Install the rear seatback lock assembly RH to the rear seatback frame sub-assembly RH.

Torque:
32 N*m (326 kgf*cm, 24 ft.*lbf)


Hide 71077S 8.INSTALL SEPARATE TYPE REAR SEATBACK COVER (for RH Side)

a.

Temporarily install the separate type rear seatback cover to the separate type rear seatback pad.


b.
B296171

Using hog ring pliers, install the separate type rear seatback cover to the separate type rear seatback pad with 2 new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




Hide 9.INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)

a.

Temporarily install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly RH.


b.
B296168

Engage the 4 claws to install the 2 rear seat headrest supports to the rear seatback frame sub-assembly RH.


c.
B296167

Engage the hook.


d.
B296166

Close the 2 fasteners as shown in the illustration.


e.
B296164

Install the 2 clips.


f.
B296163

Install the 2 clips.


Hide 72646A 10.INSTALL REAR SEATBACK STOP BUTTON GROMMET (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 72661C 11.INSTALL REAR SEATBACK LOCK RELEASE BUTTON (for RH Side)

HINT:

Use the same procedure as for the LH side.