71511S
1.INSTALL OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)
Temporarily install the separate type front seat cushion cover.
Using hog ring pliers, install 18 new hog rings.
| *1 | New Hog Ring |
| *2 | Hog Ring Pliers |
Be careful not to damage the separate type front seat cushion pad.
When installing the hog rings, take care to minimize wrinkles as much as possible.
Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 2 new hog rings.
| *1 | New Hog Ring |
| *2 | Hog Ring Pliers |
Be careful not to damage the separate type front seat cushion pad.
When installing the hog rings, take care to minimize wrinkles as much as possible.
2.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
Use the same procedure as for the driver seat (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (w/ Removable Headrest)>REASSEMBLY).
73910A
3.CONNECT FRONT SEAT AIRBAG ASSEMBLY
Use the same procedure as for the driver seat (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (w/ Removable Headrest)>REASSEMBLY).
71073S
4.CONNECT SEPARATE TYPE FRONT SEAT BACK COVER
Use the same procedure as for the driver seat (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (w/ Removable Headrest)>REASSEMBLY).
71811D
5.INSTALL FRONT SEAT CUSHION SHIELD
Use the same procedure as for the driver seat (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (w/ Removable Headrest)>REASSEMBLY).
72525A
6.INSTALL RECLINING ADJUSTER RELEASE HANDLE
Use the same procedure as for the driver seat (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (w/ Removable Headrest)>REASSEMBLY).
73230
7.INSTALL FRONT SEAT INNER BELT ASSEMBLY
71861
8.INSTALL FRONT SEAT INNER CUSHION SHIELD
9.INSTALL FRONT SEAT ASSEMBLY
Use the same procedure as for the driver seat (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (w/ Removable Headrest)>INSTALLATION).