Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR › 2011.12–2014.12
RM2170E _58 Vehicle Interior _057041 SEAT BELT _0278115 OCCUPANT DETECTION SENSOR A

SEAT BELT  OCCUPANT DETECTION SENSOR  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT SEAT ASSEMBLY

HINT:

Use the same procedure as for the driver seat (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (w/ Removable Headrest)>REMOVAL).


Hide 73230 3.REMOVE FRONT SEAT INNER BELT ASSEMBLY

Hide 72525A 4.REMOVE RECLINING ADJUSTER RELEASE HANDLE

HINT:

Use the same procedure as for the driver seat (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (w/ Removable Headrest)>DISASSEMBLY).


Hide 71811D 5.REMOVE FRONT SEAT CUSHION SHIELD

HINT:

Use the same procedure as for the driver seat (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (w/ Removable Headrest)>DISASSEMBLY)


Hide 71073S 6.DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER

HINT:

Use the same procedure as for the driver seat (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (w/ Removable Headrest)>DISASSEMBLY).


Hide 73910A 7.SEPARATE FRONT SEAT AIRBAG ASSEMBLY

HINT:

Use the same procedure as for the driver seat (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (w/ Removable Headrest)>DISASSEMBLY).


Hide 8.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

HINT:

Use the same procedure as for the driver seat (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (w/ Removable Headrest)>DISASSEMBLY).


Hide 71511S 9.REMOVE OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)

a.
B294117

Remove the 2 hog rings.


b.
B296371

Remove the 18 hog rings and the separate type front seat cushion cover from the occupant detection sensor (separate type front seat cushion pad).