1.REMOVE AIR CONDITIONER CONTROL ASSEMBLY
2.REMOVE RADIO TUNER OPENING COVER WITH BRACKET (w/o Radio Receiver)
3.REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)
85530
4.REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
Disconnect the connector.
Using a screwdriver with its tip wrapped with protective tape, disengage the claw, then turn the No. 1 power outlet socket assembly clockwise and pull the No. 1 power outlet socket assembly half way out.
| *1 | Protective Tape |
Tape the screwdriver tip before use.
Align the protrusion of the No. 1 power outlet socket assembly with the cutout of the No. 1 power outlet socket cover and then pull the No. 1 power outlet socket assembly out.
Remove the No. 1 power outlet socket assembly.
85535B
5.REMOVE NO. 1 POWER OUTLET SOCKET COVER
Disengage the 2 claws and remove the No. 1 power outlet socket cover.