58905
1.REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
Remove the 2 screws.
Disengage the 9 claws and remove the console compartment door sub-assembly as shown in the illustration.
58839A
2.REMOVE CONSOLE BOX HOLE COVER
Using a screwdriver, disengage the 4 claws and remove the 2 console box hole covers.
| *1 | Protective Tape |
Tape the screwdriver tip before use.
58903A
3.REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY
Remove the 5 screws.
Disengage the 7 claws and remove the rear console end panel sub-assembly.
58921C
4.REMOVE UPPER NO. 1 BOX PLATE
Disengage the 8 claws.
Pull the upper No. 1 box plate in the direction indicated by the arrow to disengage the 4 guides and remove the upper No. 1 box plate.
58908A
5.REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY
Remove the 2 screws and console compartment door lock sub-assembly.
58959B
6.REMOVE CONSOLE COMPARTMENT DOOR CUSHION
Using needle-nose pliers, disengage the 2 clips and remove the 2 console compartment door cushions.
| *1 | Protective Tape |
Tape the needle-nosed pliers tip before use.