85720E
1.INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH
Apply auxiliary battery voltage to the motor connector according to the table below.
Do not apply auxiliary battery voltage to any terminals except terminals 1 and 2.
| Measurement Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Terminal 2 |
Motor gear rotates clockwise |
| Auxiliary battery positive (+) → Terminal 2
Auxiliary battery negative (-) → Terminal 1 |
Motor gear rotates counterclockwise |
| *a | Component without harness connected
(Power Window Regulator Motor Assembly LH) |
| *b | Motor Gear |
| *c | Clockwise |
| *d | Counterclockwise |
If the result is not as specified, replace the power window regulator motor assembly LH.
85710F
2.INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH
Apply auxiliary battery voltage to the motor connector according to the table below.
Do not apply auxiliary battery voltage to any terminals except terminals 1 and 2.
| Measurement Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 2
Auxiliary battery negative (-) → Terminal 1 |
Motor gear rotates clockwise |
| Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Terminal 2 |
Motor gear rotates counterclockwise |
| *a | Component without harness connected
(Power Window Regulator Motor Assembly RH) |
| *b | Motor Gear |
| *c | Counterclockwise |
| *d | Clockwise |
If the result is not as specified, replace the power window regulator motor assembly RH.