Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR SUPPORT
RM2170E _59 Vehicle Exterior _057046 DOOR / HATCH _0278163 BACK DOOR SUPPORT A

DOOR / HATCH  BACK DOOR SUPPORT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 68960B 1.REMOVE BACK DOOR STAY ASSEMBLY

NOTICE:
·

Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinder while servicing.

·

Do not wear cotton gloves or other similar materials when handling the piston rod. Fibers may attach to the rod and result in gas leaks.

·

Do not apply any horizontal load to the door stay in order to prevent the piston rod from deforming.



a.
B297014E05
0.573,1.073 0.688,1.073 false 0.729,0.979 0.927,1.146 0.198,0.167 10 true *1 0.146,0.865 0.375,1.063 0.229,0.198 10 true (1) 0.271,0.469 0.5,0.656 0.229,0.188 10 true (2)

Using a screwdriver, remove the 2 stop rings as indicated by the arrows, in the order shown in the illustration.

Text in Illustration
*1 Protective Tape

HINT:

Tape the screwdriver tip before use.



b.

Release the ball joint and remove the back door stay assembly.

NOTICE:

Remove the back door stay assembly while supporting the back door by hand.



Hide 68945 2.REMOVE BACK DOOR DAMPER STAY UPPER BRACKET

a.
B297016

Remove the 2 bolts and back door damper stay upper bracket.


Hide 68961 3.REMOVE BACK DOOR STAY BOLT

a.
B314068

Remove the back door stay bolt.