Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER MOTOR
RM2170E _59 Vehicle Exterior _057048 WIPER / WASHER _0278173 FRONT WIPER MOTOR G

WIPER / WASHER  FRONT WIPER MOTOR  INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Ensure that fingers or articles of clothing do not get caught in moving parts when performing this test.


PROCEDURE

Hide 85110 1.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)

U159695E01
1.556,0.195 1.827,0.369 0.271,0.174 10 A18 1.026,1.679 1.216,1.853 0.191,0.174 10 +1 0.841,0.551 1.025,0.725 0.184,0.174 10 +2 2.244,1.679 2.367,1.853 0.123,0.174 10 E 0.08,0.039 0.239,0.213 0.159,0.174 10 *a 1.045,0.725 1.416,1.029 false 2.248,1.651 1.877,1.347 false 1.205,1.651 1.576,1.347 false

a.

Check the LO operation.

i.

Connect an auxiliary battery positive (+) lead to terminal 5 (+1) and a negative (-) lead to terminal 4 (E), and check that the motor operates at low speed.

OK:

Motor operates at low speed (LO).




b.

Check the HI operation.

i.

Connect an auxiliary battery positive (+) lead to terminal 3 (+2) and a negative (-) lead to terminal 4 (E), and check that the motor operates at high speed.

OK:

Motor operates at high speed (HI).


Text in Illustration
*a Component without harness connected
(Windshield Wiper Motor Assembly)

If the result is not as specified, replace the windshield wiper motor assembly.



Hide 85110 2.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for RHD)

U183717E01
1.556,0.195 1.827,0.369 0.271,0.174 10 A18 2.218,1.679 2.409,1.853 0.191,0.174 10 +2 2.369,0.551 2.553,0.725 0.184,0.174 10 +1 1.052,1.679 1.175,1.853 0.123,0.174 10 E 0.08,0.039 0.239,0.213 0.159,0.174 10 *a 2.393,0.725 2.022,1.029 false 2.248,1.651 1.877,1.347 false 1.205,1.651 1.576,1.347 false

a.

Check the LO operation.

i.

Connect an auxiliary battery positive (+) lead to terminal 1 (+1) and a negative (-) lead to terminal 5 (E), and check that the motor operates at low speed.

OK:

Motor operates at low speed (LO).




b.

Check the HI operation.

i.

Connect an auxiliary battery positive (+) lead to terminal 4 (+2) and a negative (-) lead to terminal 5 (E), and check that the motor operates at high speed.

OK:

Motor operates at high speed (HI).


Text in Illustration
*a Component without harness connected
(Windshield Wiper Motor Assembly)

If the result is not as specified, replace the windshield wiper motor assembly.