Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER MOTOR
RM2170E _59 Vehicle Exterior _057048 WIPER / WASHER _0278173 FRONT WIPER MOTOR A

WIPER / WASHER  FRONT WIPER MOTOR  REMOVAL  


PROCEDURE

Hide 85292B 1.REMOVE FRONT WIPER ARM HEAD CAP

a.
E237523E02
1.198,1.021 1.177,1.469 false 1.115,1.479 1.354,1.677 0.24,0.198 10 true *1

Using a screwdriver, disengage the 3 claws and remove the front wiper arm head cap.

Text in Illustration
*1 Protective Tape

HINT:
·

Tape the screwdriver tip before use.

·

Use the same procedure for the RH side and LH side.




Hide 2.REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH

a.
E237525

Remove the nut and front wiper arm and blade assembly LH.


Hide 3.REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH

a.
E237526

Remove the nut and front wiper arm and blade assembly RH.


Hide 53867 4.REMOVE FRONT FENDER TO COWL SIDE SEAL LH

a.
E237529

Disengage the 2 clips.


b.
E237527E02
0.917,1.281 0.406,1.281 false 0.698,3.219 1.177,3.229 false 0.208,1.198 0.406,1.396 0.198,0.198 10 true *1 1.198,3.146 1.406,3.333 0.208,0.188 10 true *2

Separate the double-sided tape.

Text in Illustration
*1 Double-sided Tape
*2 Clip


c.

Disengage the 3 guides, and remove the front fender to cowl side seal LH as shown in the illustration.

NOTICE:

To avoid damaging the clip when removing the front fender to cowl side seal, slide the cowl to disengage the guide from the clip with the clip engaged to the vehicle.



d.

Disengage the clip from the vehicle.


Hide 53866 5.REMOVE FRONT FENDER TO COWL SIDE SEAL RH

HINT:

Use the same procedure as for the LH side.


Hide 55781E 6.REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

a.
E237530

Remove the 2 clips.


b.

Disconnect the washer hose.


c.

Disengage the 5 claws and 3 guides as shown in the illustration.

E237531


d.

Disengage the 8 guides and pull out the cowl top ventilator louver sub-assembly as shown in the illustration.

E237533


Hide 7.REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

a.
E237535

Disengage the clamp.


b.

Remove the 2 bolts.


c.
E237536E02
0.615,0.583 0.344,0.5 false 0.177,0.406 0.333,0.563 0.156,0.156 10 true *1

Disengage the motor grommet and remove the windshield wiper motor and link assembly as shown in the illustration.

Text in Illustration
*1 Motor Grommet

NOTICE:

Be careful not to damage the windshield when removing the windshield wiper motor and link assembly.



d.
E237538

Disconnect the connector.


Hide 85110 8.REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY

a.
E237539E01
0.941,1.391 1.092,1.552 0.150,0.161 10 *1 1.675,1.144 1.124,1.413 false 2.641,0.576 2.819,0.730 0.179,0.154 10 *2 2.45,1.656 2.614,1.824 0.164,0.168 10 *a 2.124,0.654 2.632,0.654 false 2.215,1.423 2.454,1.662 false

Using a screwdriver, separate the windshield wiper link No. 2 rod from the windshield wiper link pivot of the windshield wiper motor and link assembly as shown in the illustration.

Text in Illustration
*1 Protective Tape
*2 Windshield Wiper Link No. 2 Rod
*a Windshield Wiper Link Pivot

HINT:

Tape the screwdriver tip before use.



b.
E237541E01
2.995,1.304 3.165,1.478 0.170,0.174 10 *2 1.194,0.942 1.354,1.108 0.161,0.165 10 *1 2.145,1.882 2.314,2.052 0.170,0.170 10 *a 1.881,1.034 1.388,1.034 false 2.597,1.068 2.978,1.309 false 2.231,1.412 2.231,1.871 false

Using a screwdriver, separate the windshield wiper link No. 1 rod from the windshield wiper crank pivot of the windshield wiper motor and link assembly as shown in the illustration.

Text in Illustration
*1 Protective Tape
*2 Windshield Wiper Link No. 1 Rod
*a Windshield Wiper Crank Pivot


c.
E237543

Remove the 3 bolts and windshield wiper motor assembly from the windshield wiper link assembly.