Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER RUBBER
RM2170E _59 Vehicle Exterior _057048 WIPER / WASHER _0278176 REAR WIPER RUBBER A

WIPER / WASHER  REAR WIPER RUBBER  REPLACEMENT  


PROCEDURE

Hide 85242 1.REMOVE REAR WIPER BLADE

a.
E237501

Raise the rear wiper blade to the position where the claw detaches with a click sound as shown in the illustration.

NOTICE:

Be careful not to damage the claw.



b.
E237502

Pull the rear wiper blade straight toward the left side of the vehicle to remove it from the wiper arm.

NOTICE:

Do not lower the wiper arm with the wiper blade removed. The arm tip may damage the back door glass surface.



Hide 85214R 2.REMOVE REAR WIPER RUBBER

a.

Lift and pull the end of the rear wiper rubber protrusion from the blade stopper as shown in the illustration.

E237504

NOTICE:

Do not forcibly pull out the wiper rubber. The backing plates may be deformed or the blade claws may be damaged.


HINT:

Lightly pushing the rubber in the middle will allow it to be removed more easily.



b.
E125273

Remove the rear wiper rubber with the rear wiper rubber backing plates from the rear wiper blade.


c.
E237505

Remove the 2 rear wiper rubber backing plates from the wiper rubber.


Hide 85214R 3.INSTALL REAR WIPER RUBBER

a.
E237506

Install the 2 rear wiper rubber backing plates as shown in the illustration.

NOTICE:

Install the backing plates facing the correct direction.



b.
E237507

Insert the rear wiper rubber from the front end of the rear wiper blade to the rear end through the second claw.


c.

After pushing the rear wiper rubber through the rear end claw, allow it to stick out from the rear end stopper.


d.
E237508

Slide the rear wiper rubber through the front end claw.


Hide 85242 4.INSTALL REAR WIPER BLADE

a.
E237522

Engage the claw to install the rear wiper blade as shown in the illustration.

NOTICE:

Be careful not to damage the claw.